Every slab level, every pour on time across Utah Valley.
UTVALLEY CONSTRUCTION LLC sets forms and pours flatwork from its Spanish Fork yard at 1871 E 1550 N, Spanish Fork, 84660-4758, United States, serving homeowners, builders and property managers who need drives, patios, pads and walks placed correctly the first time.
Request an Estimate See the WallUTVALLEY CONSTRUCTION LLC is a concrete flatwork contractor working out of Spanish Fork and pouring across the Utah Valley. We form, place, finish and cure driveways, patios, slabs on grade, foundations for outbuildings, garage and shop pads, curbs, sidewalks and repair overlays. Our work is flatwork in the truest sense: horizontal concrete that has to be right at the surface, because that surface is what a family walks on, parks on and looks at for the next thirty years.
A slab is only as good as the grade under it and the cure over it. We start each job by reading the lot, checking fall away from the structure, and setting string lines that hold a consistent elevation. We build our own forms, oil them properly and brace them so the pour cannot shift. When the truck arrives we place in lifts, strike off with screed rails, float, edge, joint and finish by hand or with a broom, then cover and cure. No shortcuts hide well in concrete, so we do not take any.
Whether you need a new driveway and patio, a foundation flatwork package for a shop, stamped and colored concrete for a front entry, a garage and shop pad, clean curb and sidewalk work, or a careful repair and resurfacing of existing concrete, the same crew carries the job from first stake to final cure. Reach us any time at our contact page or call +6285704317146.
Concrete is dated, batched and tested in courses just like the wall below. Each stamp stands for one of our flatwork services and the cure stage we watch most closely on that work.
Driveway and patio slabs are the concrete most people touch. We size the pour, set fall away from the house, place a proper base and finish a surface that drains cleanly. Joints are cut on time so the slab cracks where we want, never across the field.
C1Foundation flatwork covers footings, stem walls and slab on grade for shops, additions, garages and accessory buildings. We hold dimensions tight, keep steel covered and pour so that the building above starts on a level platform.
C2Stamped and colored concrete turns a plain pour into a finished floor. We place integral color, release and stamp with mats and tools matched to the pattern you choose. On decorative work the 28 day cure decides the final tone.
C3 · 28 DayGarage and shop pads carry vehicles, lifts and heavy tools, so thickness and base preparation matter as much as the finish. We build a pad that stays flat under load and sheds water at the apron.
C4Curb and sidewalk work is public facing concrete. We set forms to a true line, pour and finish to a consistent edge, and leave a walkable surface with clean joints. Trip hazards are removed and elevations line up with the surrounding grade.
C5Repair and resurfacing give sound but worn concrete another season. We remove failed sections, address the cause of the damage, pour matching patches and finish overlays so repaired areas blend into the existing slab.
C6UTVALLEY CONSTRUCTION LLC opens its spring pour calendar for Utah Valley property owners who want flatwork placed level, jointed on time and cured the full stretch.
Good flatwork begins at the crib. We stock form lumber that stays true, steel bar and mesh that sits where the drawing says, and cement blends chosen for the season and the finish. Our material crib carries boards, rebar and sacks in the same order every week so the crew is never guessing what pours next.
Concrete in Utah Valley swings between cold mornings and hot afternoons. We adjust mix, accelerators and cure blankets to the forecast instead of to habit, because a slab poured into a cold wind cures differently than one placed in July heat. That judgment is the difference between concrete that lasts and concrete that powders.
On structural pours we cast test cylinders from the same concrete that goes into the work and cap each one with its placement date. Those cylinders take a seven day break for an early reading and a twenty-eight day break for the number that counts. If the mix is off, we learn it before the owner ever sees a problem.
We keep the same discipline on small residential slabs: consistent base compaction, consistent thickness and consistent cure. The flatwork below is one of our service lines, and you can read about the full set on the services page.
Every job runs the same four stations. It keeps our estimates honest and the finished slab predictable.
We visit the site, read the slope, check drainage and measure the area so the estimate reflects the real thickness, base and access.
We strip the top soil, compact a proper base, set and brace forms, and place rebar or mesh on chairs where it belongs.
Concrete is placed in controlled lifts, struck off on screed rails, then floated, edged, jointed and finished to the chosen texture.
We cover and cure the slab for the required period, then return to strip forms, cut joints on schedule and walk the finished work with you.